Waterproofing a home is a clear indicator of concern for the space in which you live. It is not only one of the stages of construction, but also performs a number of important functions both during construction and during operation. No matter in which region of Ukraine the house is planned to be build or renovated, each building is subject to such external influences as:
• Change in air temperature;
• Sun rays;
• Soil and atmospheric moisture;
• Precipitation.
In the Ukrainian market of building materials, there is a rather wide choice of waterproofing products, each of which has peculiarities of application. Obsolete types of waterproofing are gradually receding, and new ones are gaining ground. However, there are also those who, because of ignorance of new technologies or unwillingness to “keep up with the times,” remain true to the old proven waterproofing methods. So today, we will talk about all the methods of waterproofing that are found in the construction market.
There are four types of waterproofing in Ukraine:
• Roll;
• Penetrating;
• Injectable;
• lubricating.
The roll type of waterproofing is intended for protection of buildings from water by means of gluing of roll waterproofing materials. This method is intended for use only on the exterior of the building and is generally used in parallel with other types of waterproofing.
Penetrating waterproofing protects reinforced concrete and concrete surfaces from water. A mixture of Portland cement, quartz sand, with the addition of special additives and active chemical additives penetrates the structure of building materials and create insoluble chemical compounds. This method of waterproofing is suitable if you want to protect the basement or foundation from water. It is important to keep in mind that penetrating waterproofing is forbidden to be applied on surfaces of brick and stone, and the temperature regime for carrying out robots should be not lower than + 50C.
Injectable waterproofing is the introduction of a repair liquid waterproofing composition directly into the cracks, pores and joints where they need to be protected from water. Used on concrete, bricks, butts and stones. This method of waterproofing is quite effective, especially when restoring the waterproofing of various deformation joints. However, if you want to insulate the foundation with injection, you have to be prepared for the high cost, as the material and services are quite expensive.
Waterproofing is the most modern and simple way of waterproofing foundations, roofs, terraces, the entire house and interior. Liquid rubber is used for both external and internal applications, as it is safe in terms of evaporation of toxic substances that harm health. With the help of waterproofing insulation, the walls of the basement, bathrooms and bathrooms are treated, and cracks on the walls are closed. The method of protection against water by means of a seamless covering is ideal in the ratio of the price and quality.
RINOFLEX Liquid Waterproofing is an innovative product made with all the latest technologies. “RINOFLEX” materials are specially made by order of the Ukrainian company “KMK GROUP” under the climatic conditions of Ukraine at the plant with 35 years of successful experience in the production of the world-famous waterproofing “ALCHIMICA” (Alchemist). RINOFLEX specialists are engaged in the research, development and production of one- or two-component polyurethane systems that can solve the problem of waterproofing of any type of surface in Ukraine, be it waterproofing of tape, capital foundation, indoor, tile or even roof. Liquid roofing rubber after polymerization creates an additional membrane roof. Therefore, in summer, a room that is covered with waterproofing is much cooler than in a similar structure without waterproofing.
More advanced types of waterproofing may be coming soon, but for now we can confidently say that KMC Group’s RINOFLEX waterproofing is a leader among the most effective, affordable and easy to use waterproofing applications. If you urgently need to buy waterproofing for the roof – we will deliver products to any city in the shortest possible time. By contacting KMK GROUP, you are opting for a company of Ukrainian origin with an international reputation.